Water is the most vital element in our existence. 60% of your body is water, and water affects everything else in our environment as well. Water is present on Earth in a variety of shapes and conditions while being primarily composed of hydrogen and oxygen. Most natural water sources of water are contaminated and so it is necessary to purify your water before consuming it.
Here are a few methods to purify water without a filter
This is the most straightforward method one might use. When using tap water for cooking or even drinking while at home, make sure to boil it for at least 20 minutes at a high temperature. All the bacteria, viruses, and parasites that could be present in the water are eradicated by boiling. Easy enough, isn’t it?
To purify water before ingesting, one might easily use liquid household chlorine. It is important to always remember to use the right ratio or amount of water to the appropriate chlorine content. Never go above the prescribed amount of chlorine that needs to be added to water to treat it. The only drawback to this procedure is that you will have an odd aftertaste and odor. Adding chlorine to the water and prolonged exposure to chlorine may be bad for health and may lead to life-threatening conditions.
This is more of a scientific process where water is boiled, and the water vapor is collected. This vapor is connected to a condenser, which then collects the water for drinking. Although it seems like a legitimate procedure, the biggest drawback is that the purifying process is cumbersome. It treats bacteria and germs, but it is also an expensive endeavor.
This is another form of distillation, that heats the water using the power of the sun and then collects the pure water vapor and stores it for drinking.
The bacteria and viruses that might be in your water are known to be killed by this chemical. It is a much stronger disinfectant than filtration and is also more efficient. You heard us correctly, yes! But, don't get too enthusiastic, as drinking iodine-treated water could leave a bad taste in your mouth.
UV radiation is used to purify the water, and it works by essentially destroying the DNA of the bacteria or microorganisms so that they can no longer reproduce. However, this method falls short when it comes to purging the water of physical contaminants and heavy metals.
Bleach your water
Bleach is probably the greatest way to purify water in urban crises if you don't have access to clean water. According to the EPA, bleach will kill the majority of pathogenic germs (though it will not remove chemical contaminants). They issue the following directives: Allow the water to sit if it's hazy so that the particles can settle to the bottom. Just filter the top, clearer water.
Alternatively, you might run the water through a coffee or cheesecloth filter. Find some bleach that has 8.25% sodium hypochlorite. It shouldn't have any other cleansers in it, and it should be unscented! For each gallon of water, add 6 drops. Wait 30 minutes after adding bleach to the water. There should be a faint chlorine odor in the water. Allow it to stand for 15 more minutes before consuming it.
The above-mentioned methods could be considered to purify your water but are not completely effective in giving you clean and safe drinking water. It is necessary to use a water purifier to help treat and decontaminate your water before consuming it. There are many types of water purifiers available and it is necessary to choose the right one.
Here is a list of the many options available
Activated Carbon Filter Water Purifier
Activated carbon is used in water purifiers to remove pesticides and other potentially dangerous organic substances from water. However, it is unable to eliminate minute creatures like germs and parasites as well as contaminants like fluorides, nitrates, and salt.
Sediment Water Filter
The primary purpose of a sediment filter is to remove larger solid particles like mud, filth, sludge, and other such solid particles from water.
Gravity-Based Water Filter
Gravity water purifiers use gravitational forces, as the name implies, to force water through various filter cartridge components. However, the flow rate through the filters of gravity filters is extremely slow, virtually dropping into the storage tank below.
UV Water Purifier
A UV water purifier is a type of water filter that uses ultraviolet light to eliminate bacteria and germs from the water. UV water purifiers eliminate the microorganisms in the water by beaming intense UV or ultraviolet rays at them. By penetrating bacteria, viruses, and cyst cells, UV Ultraviolet rays prevent the growth of these organisms. These organisms can't reproduce without them, and they eventually pass away. Up to 99.99% of germs in water are killed by the UV water purifier light, making it a relatively easy but efficient procedure.
RO Water Purifier
The RO membrane, which has the smallest pores of all water purification membranes, can remove all dissolved salts from water. Since there are no dissolved salts present, water that has been cleansed by a RO membrane is almost as pure as distilled water.
RO+UV+UF Water Purifier
A water purifier is said to use three different types of water purification methods when it is referred to as RO+UV+UF. A water purifier with RO+UV+UF integrates the reverse osmosis, ultraviolet, and ultrafiltration processes.
If you are looking for a reliable company that manufactures water purifiers and can keep your drinking water safe at home, your best bet is Livpure. Livpure embodies the spirit of the SAR group and was born out of the company's enthusiasm for the environment, sustainability, and creating a safe world for the next generation. Livpure has made a name for itself in India as one of the most dependable producers of some of the best water purifiers available. It is the result of many years of development and research, and it is designed to provide water purifiers to millions of people. To deliver clean drinking water to every Indian consumer, we began by researching cutting-edge water purifiers.
Also Read: How To Clean A RO Water Purifier At Home