How to check water quality of water purifier

How to check water quality of water purifier

One of the safest and healthiest solutions is to drink water from a purifier, particularly Reverse Osmosis water, as long as you frequently check the purifier to maintain its effectiveness. Regardless of how new or old the water purifier is, unless you periodically clean and maintain it, the water quality won't be any good.

Here are a few ways to maintain the quality of water!

1. Quality:

The water you are drinking is translucent, which says everything about it. Keep a watch on your water because, on occasion, even the newest and greatest water purifiers may discharge turbid water if the contamination level is too high and the filters degrade quickly. Lead, fluoride, and other dangerous TDS pollutants are present in turbid water, which a RO water purifier typically filters out, leaving only the beneficial minerals.

Check to see if your water purifier can handle hard water, to put it another way. Therefore, as soon as you notice that the color or flavor of the water differs from what you are used to, ask for a water purifier service.

2. Pre-filter inspection:

Due to contaminated water negatively affecting the RO filter's quality, most recent water purifiers are equipped with pre-filters that collect bigger particles and heavy silt before they enter the RO filter, extending the life of the latter. Ensure that yours is as well!

3. New Filters:

The sediment filter and the carbon filter are the two filters that are typically included in drinking water purifiers. While maintaining the latter helps remove chlorine and other harmful impurities that shorten the life and performance of the RO membrane, keeping the former helps strain out sediment and silt. Make careful to change your filter at least once every three months to avoid transferring pollutants to your RO water from continuous filter use.

4. Replace the membrane:

The most recent water purifiers are equipped with reverse osmosis semi-permeable membranes, which preserve minerals while filtering out contaminants, for a thorough multi-stage purification. For the membrane to work at its best, make sure it is replaced frequently. Of course, your water quality and usage will determine this.

5. Inspect the body:

Even the most modern and advanced water purifiers can succumb to obstructions and damage from abrasive outside forces. Make sure to get it serviced by a professional if you notice any leaks or drips. Make sure your RO Water Purifier is regularly serviced because leaks can frequently result in health issues.

6. Regular servicing:

When using a water purifier, we must use caution. Even though many purifiers offer a lengthy warranty, maintenance must be performed once a month. Water purifiers have a long lifespan, but even a small defect could have a big impact. Therefore, it is important to regularly service your water purifier. Additionally, make sure you ask the serviceman to check the RO membrane's functionality, filter performance, and drinking water output quality, and to keep you informed.

While considering the above points, it is also important to consider the TDS of the water we are consuming. So, what does TDS stand for? TDS stands for Total Dissolved Solids.

What are TDS levels?

TDS level of water is the measure of all organic and inorganic substances that are dissolved in your water. The most common impurities found in water are magnesium, calcium, and potassium. The presence of these minerals in the water is generally good, but when the concentration rises too high, it can be concerning. Calcium, magnesium, and other commonly found TDS elements are generally safe. However, heavy metals including lead, mercury, arsenic, and fluoride pose serious health risks.

Although the TDS level does not indicate if any of the pollutants that make up the TDS level are present or not. However, it does offer you a general indication of your drinking water's overall quality. The best part is that, as you'll see below, testing the TDS level is simple. There are no justifications for not being aware of the TDS content of the water your family drinks. If the TDS level is high (above 500 mg/l), the water's quality is poor, and you shouldn't consume it without first purifying it.

What is the ideal TDS level of the water?

The optimal TDS of drinking water is not suggested as a health-based recommendation value. Because there are numerous reasons why TDS levels in water can be high, it is important to identify each ingredient in locations where TDS levels in the water supply are extremely high. Dissolved particles in water may change how it tastes.

Panels of tasters have graded the palatability (acceptable taste) of drinking water in relation to its TDS level as follows:

  • Less than 300 = Excellent
  • 300-600 = Good
  • 600-900 = Fair
  • 900-1200 = Poor
  • Above 1200 = Unacceptable

Does a high TDS level imply that the water is always unsafe to drink?

Never forget that a high TDS does not always indicate that the water is hazardous to drink. It can also imply that the flavor, color, or smell may be a little off. The ideal TDS for drinking water is less than 300 mg/liter, while 500 mg/liter is the highest level that is deemed safe.

It is advisable to have your drinking water analyzed if you are curious about how excellent or awful it is.

How can the TDS content of drinking water be lowered?

Reverse osmosis (RO) water purifiers are an excellent way to lower the excessive TDS levels in the water. Modern technology is used in the construction of these purifiers to guarantee that the levels of TDs in the water are decreased and that the water is suitable for drinking. If you intend to get one, you can look at the most recent selection of RO water purifiers.

You may even test the longevity and functionality of the RO membrane using a TDS meter and replace it if necessary.

About Livpure

If you are still looking for a purifier, your hunt will be over thanks to Livpure's outstanding filtration. Reverse osmosis water purifiers come with an integrated UV water purifier to thoroughly remove impurities including heavy metals, chemicals, microorganisms, and more. You can choose an optional 8-stage filter with a copper infusion to benefit from the added health advantages of copper water. Why have you not arrived yet? Get the Livpure UV water purifier right away.

You can find all the information on our official website, and if you have any questions, you can email or call our customer service line.

Also read : There is chlorine present in my water. Is it bad for health

Back to blog